Simforge Single Monitor Stand — Single Screen VESA Mount (27″–32″) + VESA Adapter Kit

17,999.99

Simforge Single Monitor Stand — Single Screen VESA Mount (27″–32″) + VESA Adapter Kit Build a stable, eye‑level setup with this heavy‑duty sim racing monitor stand for 27″–32″ displays. The Simforge Single Monitor Stand delivers precise height, tilt, and distance control so your FOV stays consistent and immersive during long stints and high‑FFB sessions. Key…

Available on backorder

Description

Simforge Single Monitor Stand — Single Screen VESA Mount (27″–32″) + VESA Adapter Kit

Build a stable, eye‑level setup with this heavy‑duty sim racing monitor stand for 27″–32″ displays. The Simforge Single Monitor Stand delivers precise height, tilt, and distance control so your FOV stays consistent and immersive during long stints and high‑FFB sessions.

Key features

  • Single screen VESA mount: Supports VESA 75×75 and 100×100 for broad monitor compatibility.
  • Adjustable geometry: Fine‑tune height, leg width, and fore‑aft reach for GT, formula, or truck seating.
  • Heavy‑duty build: 80×40 aluminum profiles and reinforced steel tubes reduce wobble vs desk monitor arms.
  • Level & square: Adjustable feet help you true the stand on uneven floors for a straight horizon line.
  • Clean finish: Powder‑coated surfaces, plastic end caps, and tidy cable routing for a professional cockpit look.

Premium build quality

This monitor mount for sim rigs is engineered for stability at the wheel centerline. Structural aluminum and steel keep the screen steady under load‑cell braking and direct‑drive oscillations, improving depth cues, HUD readability, and endurance comfort.

Adjustability & ergonomics

Set screen height to eye level, add a slight tilt to reduce glare, and dial distance to your FOV calculator. Switching from upright truck to lower GT? The adjustable VESA kit makes position changes quick and repeatable—ideal for shared rigs.

Compatibility

  • Displays: Optimized for 27″–32″ gaming monitors; supports larger TVs if VESA pattern and weight are in spec.
  • Rigs/stands: Pairs with folding wheel stands and most 80/20 profile cockpits; adapter plates available for tubular frames.
  • Standards: VESA 75×75 & 100×100 for universal mounting and secure installation.

VESA Adapter Kit included

The bundle includes the official Simforge VESA Adapter Kit, a universal, adjustable VESA adapter designed specifically for sim racing monitor stands and profile cockpits. Engineered for 75×75 and 100×100 VESA patterns, this VESA mount adapter kit delivers precise alignment and rock‑solid clamping for 27″–32″ gaming monitors and many curved or ultrawide displays.

  • Expanded patterns: Step‑up/step‑down plates bridge 75×75 and 100×100 for more monitor brands.
  • Precision alignment slots: Micro‑adjust the centerline to align perfectly with your wheel hub.
  • Reinforced hardware: High‑tensile fasteners deliver a rigid, rattle‑free mount over time.
  • Faster installs: Marked hole spacing and included spacers simplify curved or recessed backs.

Learn more or buy separately: Simforge VESA Adapter Kit.

Convert to triple screen any time

Start single and upgrade later—this monitor stand is triple‑screen ready. Add the official Simforge Triple Screen Add‑On Arms to mount two side monitors with matched height, angle, and curvature. The add‑on uses the same center stand for a clean, rigid, panoramic setup.

Perfect for

  • Racers needing a stable single screen monitor stand with repeatable positioning
  • Desk racers replacing shaky monitor arms with a rigid free‑standing solution
  • Cockpit builders wanting a heavy‑duty VESA monitor mount with a clear triple‑screen upgrade path

FAQ

Does it fit my cockpit? Works beside wheel stands and alongside most 80/20 rigs—check width/clearance for your frame.

What sizes are supported? Best with 27″–32″ monitors; larger TVs supported if VESA and weight match spec.

What adjustments are available? Height, tilt, leg width, and fore‑aft position via the adjustable VESA kit.

How long does assembly take? Typically under 30 minutes with included hardware and tools.

Recommended Simforge add‑ons

Videos giving More info on Monitor Mounts for Sim Racing

Simforge single monitor stand for Sim Racing with Vesa Adaptor Kit

 

Additional information

Weight 19 kg
Dimensions 81 × 29 × 14 cm

Reviews

There are no reviews yet

Be the first to review “Simforge Single Monitor Stand — Single Screen VESA Mount (27″–32″) + VESA Adapter Kit”

Your email address will not be published. Required fields are marked *

You may also like…

Select your currency
INR Indian rupee