Description
Simforge Mark-1 Sim Racing Pedals – Precision Carbon Steel Construction with Hall Sensors & Load Cell Brake
Take your sim racing to the next level with the Simforge Mark-1 Sim Racing Pedals. Engineered for precision and adjustability, these pedals offer an unparalleled racing experience with 3mm carbon steel construction, Hall sensor technology, and a 80kg load cell brake pedal. Whether you’re competing in virtual racing events or fine-tuning your setup, these pedals deliver the performance, accuracy, and customization you need for the most immersive experience.
The Simforge Mark-1 Pedals are designed with 14 angle adjustments for the individual pedals, ensuring that you can tailor the setup to your exact preferences. The adjustable foot pad allows for both height and side-to-side adjustments, providing optimal comfort. With PedalFx Calibration Software and V5 electronics board, you can easily fine-tune your sensitivity, pedal travel, and stiffness for the perfect pedal feel.
Designed for serious racers, the brake pedal includes an 80kg load cell (150kg max) and 24-bit resolution, offering incredible precision and realistic feedback. Both the accelerator and clutch pedals are equipped with Hall sensors, providing 10-bit resolution for smooth and responsive inputs. Choose between three different types of Polyurethane bumpers (90S, 80S, 70S) for customizable resistance levels.
Key Features:
-
 3mm Carbon Steel Construction – Built for durability and strength
-
 V5 Electronics Board with PedalFx Calibration Software – Allows for precise customization of pedal feel
-
 14 Adjustable Angles for individual pedals – Achieve the perfect pedal position
-
 Hall Sensor Technology – Featured in accelerator and clutch pedals for ultra-smooth and responsive inputs
-
 80kg Load Cell Brake Pedal – High precision braking with 24-bit resolution
-
 Adjustable Pedal Travel – Customize pedal travel for all three pedals
-
 Pedal Stiffness Adjustments – Fine-tune stiffness to suit your preference
-
 Polyurethane Bumpers – Three types (90S, 80S, 70S) to adjust resistance and feel
-
 Adjustable Foot Pad – Height and side-to-side adjustments for ultimate comfort
-
 40120 Mounting Base – Provides easy installation on most sim racing cockpits
-
 Adjustable Heel Plate – Customizable in position, height, and angle for personalized ergonomics
tylerholmes11257 (verified owner) –
These pedals are incredible. I ordered them mid-July and they arrive about a month later (to the US), very well packaged and organized. Plus they came with plenty of mounting hardware. The construction and build quality is top tier – there’s no extra grease in joints, no sharp edges to worry about cutting yourself on and no burrs leftover from the machining process. You can tell it’s made with good precision and tolerances, because there’s very little play where there shouldn’t be.
On the usability side, I’ve got nothing but positivity. The software is nothing fancy, but that’s okay in my opinion because its very easy and intuitive to use and calibrate your pedals. I was ready to race within 10 mins of plugging the pedals in. The pedals are very adjustable with just loosening a few screws. I typically drive F1 cars, so shortening the throttle throw was my first adjustment and it was quick and easy. No issues with games, Assetto Corsa picked up the pedals on the first launch. The first thing you’ll notice is the brake sensitivity – its insane. If you lightly tap it with your finger (and by tap, I mean no harder than you would type a message on your phone), it will read the brake pressure. It caught me off guard on my first few laps, because the car was going noticeably slower down the straights at full throttle. When I went back to the calibration software to investigate, it turns out my tendency to lightly rest my foot against the brake pedal when not braking, was actually registering on these – my old pedals were insensitive to this.
For the price (even with shipping), these are unmatched. There’s nothing out there that comes close for the value. 5-stars and more. I’d also like to give a shoutout to Simforge for being so responsive to my questions.
Mark Taylor (verified owner) –
To put it simply…..get your orders in guys!
I’ve gone from the plastic two pedal set you get with the likes of T300’s and moved up to tp3a’s which made me realise the importance of a good pedal set.
From there I moved on up the a set of csl elite’s and into the realms of ‘load cell’ pedals.
It changed the way I raced in any sim ,but I knew from the start these were a set of pedals at the lowest end of the load cell market.
So I kept looking for the bigger upgrade but would not pay the high end prices some company’s were/are asking. I wanted pedals that worked at the top end of the scale and also that looked like a proper race pedal.
When I came across the ‘SIMFORGE MK1’s’ I thought they were charlatans in the sim racing hardware game,but I was wrong. I thought surely they can’t be top end at this price point,but I was wrong. I did have some problems with calibration but that was on me and not SIMFORGE.
I reached out on their chat service 2 or 3 times and was helped by the ever patient Sachin who talked me through what I needed to do and made me realise it’s actually really simple to set up. I can’t recommend these pedals enough. They feel and perform way higher than the price tag they come with !
As for my lap times? I’m consistently improving and really enjoying my upgrade to the upper level at a amazing price point.
If your still in doubt just look at the really positive reviews on YouTube from the master himself…..Barry Rolland form ‘the sim racing garage’ and you’ll be putting your order in as quick as you can.
Price-quality-and a fantastic support service makes the SIMFORGE MK1’s a no brainer.